Front Spindles and Brakes

By now the brakes and spindles had arrived so I was able to finish up the front assembly.  I had one torn dust boot (the blue things) so I decided to replace them all with some new ones from Energy Suspension.

I also realized that I had initially installed the steering arms on the wrong sides.  The hole should be smaller on the top than on the bottom.  Itorder to remove thos you have to remove the spindle from the lower control arm.  In order to get a socket on the lower ball joint nut you have to remove the upper ball joint from the spindle.  So I basically assembled the spindles to the control arms twice :).